The MG H-Seam panel system has been created with complexity in mind and can be fabricated to suit complicated structures or field conditions. This system can be installed on walls or roofs and are excellent for soldered roofing or rain screen applications. The panels have an interlocking hook seam connection and are mechanically fastened with concealed clips and fasteners and then installed in a sequential pattern, hooked on all four sides to form a watertight system
MG H-SEAM
FLAT LOCK STYLE PANEL SYSTEM
PANEL COMPOSITION
MATERIAL OPTIONS & FINISHES
| MATERIAL | THICKNESS |
SIZES (TYPICAL) |
FINISHES |
| Stainless | 24 – 16 gauge | Seam Spacing: 6” or 24” Length: 12” to 118” | Standard and custom colors available |
| Aluminum | .032” to .125” | Seam Spacing: 6” or 24” Length: 12” to 118” | Standard and custom colors available |
| Copper | 16oz & 20oz | Seam Spacing: 6” or 24” Length: 12” to 118” | MG copper custom patina finishes |
| Zinc | .7mm to 1.5mm | Seam Spacing: 6” or 24” Length: 12” to 118” | MG zinc custom patina finishes, or standard and custom colors |
| Titanium | 26 gauge | Seam Spacing: 6” or 24” Length: 12” to 118” | Standard and custom colors available |
TECHNICAL DATA & SPECIFICATIONS
FEATURES & OPTIONS
Features & Options
-
Includes interlocking slip connection clips and stiffeners if required
-
Panel system to accommodate substructure tolerance of +0 to -1/8 inch
-
Panels can be installed over almost any substrate
-
Custom alloys available based on material choice
-
Milled, brushed, mirrored, colored, and textured finish options available
