The MG R-Seam panel system is a uniform system that offers a smooth, flat appearance for either horizontal or vertical applications. Panels are joined together using an interlocking slip connection and are mechanically fastened with concealed fasteners to form a flush reveal joint. These recessed reveal joints really set this system apart because they are formed continuously for the sought-after continuity look. The system is installed with panels overlapped and sealed in a sequential pattern, as required to form a watertight system. The architectural rib option stiffens the panels even further to reduce oil canning
MG R-SEAM
FLUSH SEAM STYLE PANEL SYSTEM
PANEL COMPOSITION
MATERIAL CHOICES & FINISHES
| MATERIAL | THICKNESS | FINISHES |
| Steel | 22 – 26 gauge | MG steel custom patina finishes, or standard and custom colors |
| Stainless | 24 – 26 gauge | Standard and custom colors available |
| Aluminum | .032” & .125” | Standard and custom colors available |
| Copper | 16oz, 20oz, & 24oz | MG copper custom patina finishes |
| Zinc | .7mm to 1.5mm | MG zinc custom patina finishes, or standard and custom colors |
| Titanium | 26 gauge | Standard and custom colors available |
*Materials, sizes, and thicknesses are general guidelines and estimates. Capabilities and options may vary as material gauge and panel length fluctuate. Please contact us for a more detailed range of size options and capabilities based on your project’s requirements and design intent (as engineering allows)*
TECHNICAL DATA & SPECIFICATIONS
FEATURES & OPTIONS
Features & Options
-
Includes interlocking slip connection clips and stiffeners if required
-
Panel system to accommodate substructure tolerance of +0 to -1/8 inch
-
Panels can be installed vertically or horizontally over almost any substrate
-
Custom alloys available based on material choice
-
Variable reveal width
