MG S-Lock standing seam panels offer versatility based on the design and performance needs of the project. The seam height has two options to create the desired appearance, and the entire system can be used for either roof or wall applications. Everything fits together with a snap lock seam and is mechanically fastened with concealed fasteners. The panels are installed in a sequential pattern, overlapped and sealed as required to form a watertight system. The systems design is both flexible and functional with a reduced need for field applied parts
MG S-LOCK
STANDING SEAM STYLE PANEL SYSTEM
PANEL COMPOSITION
MATERIAL OPTIONS & FINISHES

MATERIAL | THICKNESS |
SIZES (TYPICAL) |
FINISHES |
Steel | 22 – 26 gauge | Width: 8” to 20” Length: 12” to 100” | MG steel custom patina finishes, or standard and custom colors |
Stainless | 24 – 26 gauge | Width: 8” to 20” Length: 12” to 100” | Standard and custom colors available |
Aluminum | .032” & .40” | Width: 8” to 20” Length: 12” to 100” | Standard and custom colors available |
Copper | 16oz, 20oz, & 24oz | Width: 8” to 20” Length: 12” to 100” | MG copper custom patina finishes |
Zinc | .7mm to 1.5mm | Width: 8” to 20” Length: 12” to 100” | MG zinc custom patina finishes, or standard and custom colors |
TECHNICAL DATA & SPECIFICATIONS
FEATURES & OPTIONS
Features & Options
-
Includes snap-lock seam clips and stiffeners if required
-
Panel system to accommodate substructure tolerance of +0 to -1/8 inch
-
Panels can be installed over almost any substrate
-
Custom alloys available based on material choice
