Since its founding in 1871, Lakewood Cemetery in Minneapolis has served as the foremost resting place for Minnesota’s distinguished citizens. Familiar names like Humphrey, Wellstone, Pillsbury, and Walker are found here, among a long list of local pioneers, heroes, civic leaders, industrialists and art patrons. The private, non- sectarian cemetery is laid over 250 acres of rolling landscape adjoining the city’s historic Grand Round’s parkway system. Lakewood Cemetery’s historical importance and impeccably manicured grounds make it a treasured landmark and community asset in the City’s Uptown neighborhood. – ArchDaily
In the new Lakewood Cemetery Garden Mausoleum, daylighting is exquisitely balanced with electric light to create a luminous resting place for the dead and a place of respite for the living. -Architectural Lighting
The 142-year-old Lakewood Cemetery faced a challenge: how to create a commemorative 21st century space within a revered, landmark setting. The Garden Mausoleum project meets this challenge adroitly, sustainably and gracefully. With the landscape enveloping two thirds of the building within a south-facing slope, architecture opens out onto an expansive, peaceful landscape with a quiet reflecting pool, groves of native trees and contemplative alcoves—a distinctly contemporary design in harmony with its historic environment. -ASLA Award
MG McGrath’s Scope of Work: MG McGrath installed 3″ Thermax sheathing, Z furring, 3/4″ plywood, 30# felt, copper vertical standing seam wall panels out of 16 ounce copper. MG McGrath fabricated all of the window trims using .063” polished, and patinized Muntz Bronze. Conical skylights were installed on the green roof and they were made of 1/8” polished, and patinized Muntz Bronze. All exterior copings consisting of Quartz Zinc, and 1/8” Bronze were fabricated by MG McGrath. Interior: Interior oculus skylight trim rings were fabricated and installed by MG McGrath. They were then plastered over to give the entire interior of the skylight the same finish. MG McGrath fabricated face plates to modify exit light signs using 1/8” Aluminum which received a plaster finish to blend in with the wall, and the Bronze, which was installed into an architectural brick wall. MG McGrath fabricated slotted, radiused, .090” diffusers directly inside the glass of the conical skylights and they can be seen from outside on the green roof. We fabricated 3 round, conical, cover plates for the Bocci lights on the second floor of the mausoleum. They were fabricated and installed in a manner that allows a person to change a light bulb without taking the entire cover plate off. They are mounted with fasteners, but also have a chain which will hold the cover from falling when the fasteners are removed. All of the interior window frames were clad with .063” patinized Muntz Bronze.